Users Guide

Path where the package is created
Description To provide the path of the package created using the –destination-
type and to be saved.
NOTE: When using --destination-type=ISO, the ISO
lename provided in --destination-location should adhere
to ISO9660 le system standards. For more details refer
man page of genisoimage .
Command Syntax for Linux
dsu --destination-location=<DIR>
Command Syntax for Microsoft Windows
dsu --destination-location=<DIR>
Bootable ISO log
Description This option enables one to specify the location at which the log
shall be written while applying the updates using the bootable ISO
created using DSU.
Command Syntax for Linux
dsu --bootable-log-location=<Log file location>
Command Syntax for Microsoft Windows
dsu --bootable-log-location=<Log file location>
Congures the type of repository
Description To congure the source type of repository. The supported type is
<REPOSITORY> and <OSNATIVE> for Linux operating system
and for Microsoft Windows operating system. By default the source
location will be to downloads.dell.com.
Command Syntax for Linux
dsu --source—type=<TYPE>
Command Syntax for Microsoft Windows
dsu /source—type=<TYPE> or --source—type=<TYPE>
Path to save the log le
Description To provide the le path to save the dsu log le.
Command Syntax for Linux
dsu --output-log-file=/root/dsu.log
Command Syntax for Microsoft Windows
dsu /logfile=C:\dsu.log
List Critical updates
Description To report components with critical is displayed.
Command Syntax for Linux
dsu --list-critical-updates
Command Syntax for Microsoft Windows
dsu /list-critical-updates or--list-critical-
updates
Congures the logger
Description
To congure the dsu logger.
0 to disable / OFF
1 to enable (there are 4 levels)
Updating the system using DSU 13