Users Guide

Command for Linux:
dsu --ignore-signature
Command for Windows:
dsu --ignore-signature
Component Type
Component type filter lists the updates that are required for the specified component type.
The following are the five component type filters provided:
1. FRMW (Firmware)
2. BIOS
3. APAC (Application)
4. APP (Application)
5. DRVR (Drivers)
NOTE: APP is used only for upgrading OMSA DUPs
NOTE: For JSON supported files, APAC component is displayed as EAPP.
NOTE: The category filter option works when the IC version is greater or equal to 20.04.200, it lists specified components
in the servers. Else, the filter list all the components in the server.
If the dependency is not met for the specified component type, the component information is not displayed. But updating of
components runs on the available types.
Command Syntax for Linux:
dsu --component-type=<component type values>
Command Syntax for Windows:
dsu --component-type=<component type values
NOTE: For Driver, inventory lists all the required updatable and non- updatable parent component and sub components.
Remote
With remote option, user can enable updates of the remote systems, to provide the credentials of the remote system, and to
push updates to the remote system.
Pre-requisites:
● It is recommended to provide equivalent options while performing reboot on remote servers.
● Remote option is supported only on iDRAC9 and later.
● Ensure to use compatible DSU version when using the DSU options for remote system.
● For Windows Operating Systems, ensure to log in once to remote server for uninterrupted connection.
Enabling updates of the remote systems
To enable the compatibility of the remote system with the host system.
Command for Linux:
dsu --remote
Dell System Update Options
57