Owners Manual

Item Ports, panels, and
slots
Icon Description
● Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For
more information, see Status LED indicators.
● Quick Sync 2 (wireless): Indicates a Quick Sync enabled
system. This feature allows management of the system by
using mobile devices. This feature aggregates hardware or
firmware inventory and various system level diagnostic and
error information that can be used in troubleshooting the
system. For more information, see the Integrated Dell
Remote Access Controller User’s Guide at Dell.com/
idracmanuals.
2 Optical drive N/A One optional slim SATA DVD-ROM drive or DVD+/-RW drive.
NOTE: DVD devices are data only.
3 USB port (optional)
The USB port is USB 3.0 compliant.
4 VGA port Enables you to connect a display device to the system. For
more information, see Technical specifications on page 15.
5 Right control panel N/A Contains the power button, USB port, iDRAC Direct microUSB
port, and the iDRAC Direct status LED.
6 Drive slots N/A Enable you to install drives that are supported on your system.
For more information about the supported drives, see Technical
specifications on page 15.
Right control panel
The right control panel contains the power switch, a USB port, an iDRAC Direct port and LED.
Figure 3. Right control panel view
Item
Indicator or button Icon Description
1 Power button
Indicates if the system is turned on or off. Press the power button to
manually turn on or off the system.
NOTE: Press the power button to gracefully shut down an ACPI-
compliant operating system.
2 USB port
The USB ports are 4-pin, 2.0-compliant. These ports enable you to
connect USB devices to the system.
NX3340 system product overview 9