Owners Manual

Figure 46. Installing expansion cards into the expansion riser 1A
Figure 47. Installing an expansion card into the expansion riser 2A
Next steps
1. After installing a card into the riser 1, close the PCIe card holder latch. If applicable, close the PCIe guide after installing the
expansion card.
2. Follow the procedures in After working inside your system.
3. Install any device drivers required for the card as described in the documentation for the card.
Network daughter card
The network daughter card (NDC) is a small, removable mezzanine card, which provides the flexibility of selecting different
network connectivity options.
86
Installing and removing system components