Owners Manual

Figure 43. Removing an expansion card from riser 2A

3. If you are removing the card permanently, install a metal filler bracket over the empty expansion slot opening and close the

expansion card latch.

NOTE:

You must install a filler bracket over an empty expansion card slot to maintain Federal Communications

Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper

cooling and airflow inside the system.

Figure 44. Installing a filler bracket into riser 1A

4. Insert the expansion card latch into the slot to secure the bracket.

Next steps

Install the expansion card into expansion card riser.

Installing and removing system components