Owners Manual

Removing an expansion card riser

Prerequisites

1. Follow the safety guidelines listed in Safety instructions.

2. Follow the procedures in Before working inside your system.

3. Before removing the expansion card riser 2A, remove the expansion card from the riser, if installed.

4. Disconnect any cables connected to the expansion card.

Steps

Hold the touch points, and lift the expansion card riser, from the riser connector, on the system board.

Figure 38. Removing the expansion riser 1A

Figure 39. Removing the expansion riser 2A

Next steps

Install the expansion card riser.

Installing and removing system components