Owners Manual

Figure 79. Removing left control panel
4. Hold the control panel by its sides, and then remove the control panel away from the system.
Next steps
Install the left control panel.
Installing the left control panel
Prerequisites
Follow the safety guidelines listed in Safety instructions.
Steps
1. Route the control panel cable through the side wall of the system.
2. Align the left control panel assembly with the control panel slot on the system and attach the control panel assembly to the
system.
3. Connect the control panel cable to the system board connector and secure it using cable latch.
4. Use the Phillips #1 screwdriver to install the screws that secure the control panel to the system.
Figure 80. Installing the left control panel
5. Use the Phillips #1 screwdriver to install the screws that secure the cable cover to the system.
114
Installing and removing system components