Owners Manual

Figure 75. Removing the system board
Next steps
Install the system board.
Installing the system board
Prerequisites
Follow the safety guidelines listed in Safety instructions.
Steps
1. Unpack the new system board assembly.
CAUTION: Do not lift the system board by holding a memory module, processor, or other components.
CAUTION: Take care not to damage the system identification button while placing the system board into the
chassis.
2. Holding the system board holder and release pin, insert the system board into the system.
3. Holding the system board holder, push the system board toward the back of the system until the release pin clicks into place.
Installing and removing system components
109