Setup Guide
Setting up Your Dell EMC NX3240 and NX3340 Systems
(continued)
4 | Initial conguration 5 | More information
1. When you start your NAS system that runs Windows Storage
Server 2016 for the rst time, on the Default Password page,
click OK.
NOTE: Before changing the password, make sure that you
change the system language according to your preference.
2. To change your administrator password, press Ctrl+Alt+Del, and
then click Change a Password.
3. To change the default language, navigate to
C:\Dell_OEM\MUI and run the appropriate language batch le.
Complete the on-screen instructions to install your
preferred language.
Server Manager starts automatically when you log in the rst time.
In Server Manager, click Congure this local server to:
• Change the computer name (if required)
• Add NAS system to the domain
• Check for latest Windows updates
• Specify the time zone
• Configure remote desktop
NOTE: To start a software system, on the taskbar, click
Start, and then click the program name.
Dell EMC OpenManage Server Administration
You can monitor your system remotely by using Dell EMC OpenManage Server Administrator. To access Dell EMC OpenManage Server Administrator, connect to the
secure port, 1311, of your NAS system. For example, type: https://D<ServiceTag>:1311, where
<ServiceTag>
is Service Tag. To locate the Service Tag of your
system, see the section Locating your system Service Tag in this document.
Documentation
For more information, see the following documentation at Dell.com/storagemanuals.
Title Description
Getting Started Guide Provides an overview of system features, setting up your system, and technical specications. This document is also shipped with
your system.
Installation and Service Manual Provides information about system features and describes the system and installing or replacing system components.
Rack Installation Guide Describes the process of installing your system into a rack. This document is also shipped with your rack solution.
Administrator’s Guide Provides information about conguring and managing the system.
Troubleshooting Guide Provides information about troubleshooting the software and the system.
Dell EMC OpenManage Server
Administrator User’s Guide
Provides information about using the OpenManage Server Administrator to manage your Dell EMC system or NAS
system.
NOTE: For any documentation related to Dell EMC OpenManage Server Administrator, go to Dell.com/openmanagemanuals.
Documentation feedback
You can rate the documentation or write your feedback on any of our Dell EMC Documentation pages and click Send Feedback to send your feedback.
Copyright © 2018 Dell Inc. or its subsidiaries.
2018 - 05
Rev. A00
Starting remote desktop
NOTE: Make sure that you have completed the Initial Conguration tasks before connecting to the NAS system using remote desktop.
• Enable remote desktop using Server Manager or system properties (Control Panel → System).
• If Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS) are implemented on your network, your system automatically configures the network settings. You
can start remote desktop from a client and remotely access the NAS system using either the default system name or the IP address.
For example, in the Remote Desktop Connection dialog box, type D<ServiceTag>, where <
ServiceTag
> is the Service Tag.
To locate the Service Tag of your system, see the section Locating your system Service Tag in this document.
NOTE: The default password is Stor@ge!