Owners Manual
Table Of Contents
- PowerVault NX3340 Network Attached Storage System Installation and Service Manual
- Contents
- NX3340 system product overview
- Technical specifications
- Initial system setup and configuration
- Pre-operating system management applications
- Options to manage the pre-operating system applications
- System Setup
- Viewing System Setup
- System Setup details
- System BIOS
- Viewing System BIOS
- System BIOS Settings details
- System Information
- Viewing System Information
- System Information details
- Memory Settings
- Viewing Memory Settings
- Memory Settings details
- Processor Settings
- Viewing Processor Settings
- Processor Settings details
- SATA Settings
- Viewing SATA Settings
- SATA Settings details
- Boot Settings
- Viewing Boot Settings
- Boot Settings details
- Choosing system boot mode
- Changing boot order
- Integrated Devices
- Viewing Integrated Devices
- Integrated Devices details
- Serial Communication
- Viewing Serial Communication
- Serial Communication details
- System Profile Settings
- Viewing System Profile Settings
- System Profile Settings details
- System Security
- Viewing System Security
- System Security Settings details
- Creating a system and setup password
- Using your system password to secure your system
- Deleting or changing system and setup password
- Operating with setup password enabled
- Miscellaneous Settings
- Viewing Miscellaneous Settings
- Miscellaneous Settings details
- iDRAC Settings utility
- Device Settings
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Diagnostics and indicators
- Jumpers and connectors
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Front bezel
- System cover
- Backplane cover
- Inside the system
- Air shroud
- Cooling fans
- System memory
- Processors and heat sinks
- Expansion cards and expansion card risers
- Network daughter card
- Integrated storage controller card
- Hard drives
- Drive backplane
- System battery
- USB module
- Optional internal USB memory key
- Optical drive—optional
- Power supply units
- System board
- Trusted Platform Module
- Control panel
- Getting help
Right control panel
The right control panel contains the power switch, a USB port, an iDRAC Direct port and LED.
Figure 3. Right control panel view
Item Indicator or button Icon Description
1 Power button
Indicates if the system is turned on or off. Press the power button to manually turn
on or off the system.
NOTE: Press the power button to gracefully shut down an ACPI-compliant
operating system.
2 USB port
The USB ports are 4-pin, 2.0-compliant. These ports enable you to connect USB
devices to the system.
3 iDRAC Direct LED N/A The iDRAC Direct LED indicator lights up to indicate that the iDRAC Direct port
is actively connected to a device. For more information, see iDRAC Direct LED
indicator codes.
4 iDRAC Direct port
(Micro-AB USB)
The iDRAC Direct (Micro-AB USB) port enables you to access the iDRAC Direct
(Micro-AB) features. For more information, see the iDRAC User’s Guide at
Dell.com/idracmanuals.
Left control panel
The left control panel contains status indicators, a system health indicator, and the iDRAC Quick Sync 2.0 indicator.
Figure 4. Left control panel
NX3340 system product overview
9