Owners Manual

Figure 37. Installing a 2.5-inch drive into the 3.5-inch drive adapter

Next steps

1. Install a 3.5-inch adapter into the 3.5-inch drive carrier.

2. Follow the procedures in After working inside your system.

Removing a 3.5-inch adapter from a 3.5-inch drive carrier

Prerequisites

1. Follow the safety guidelines listed in Safety instructions.

2. Follow the procedures in Before working inside your system.

3. Remove the 3.5-inch drive carrier from the system.

Steps

1. Remove the screws from the rails on the drive carrier.

2. Lift the 3.5-inch drive adapter out of the drive carrier.

Installing and removing system components