Owners Manual

Figure 13. Installing the system cover

NOTE: The images shown here are for representation only and the actual configuration of your system may vary.

Next steps

1. Reconnect the peripherals and connect the system to the electrical outlet.

2. Turn on the system, including any attached peripherals.

Backplane cover

This section contains information about the removal and installation of the backplane cover.

Removing the backplane cover

Prerequisites

1. Follow the safety guidelines listed in Safety instructions.

2. Follow the procedures in Before working inside your system.

Steps

1. Slide the backplane cover in the direction of the arrows marked on the backplane cover.

2. Lift the backplane cover away from the system.

Installing and removing system components