Owners Manual

Figure 85. Installing 3.5-inch rear drive backplane

Next steps

1. Install all the drives.

2. Connect all the cables to the backplane.

3. Follow the procedures in After working inside your system.

Cable routing

Figure 86. Cable routing – 12 x 3.5-inch backplane with mini PERC

backplane 2. backplane signal cable (BP: BPSIG1 to MB: BPSIG1)

3. backplane power cable (BP: BP1 to MB: BP1) 4. system board

5. mini PERC 6. SAS cable (BP: J_SAS_A0_B0 to mini PERC)

Installing and removing system components 115