Owners Manual

Item Indicator or button Icon Description
2 System health and system
ID indicator
Indicates the system health. For more information, see the
System health and system ID indicator codes section.
3 iDRAC Quick Sync 2
wireless indicator
Indicates if the iDRAC Quick Sync 2 wireless option is activated.
The Quick Sync 2 feature allows management of the system
using mobile devices. This feature aggregates hardware or
firmware inventory and various system level diagnostic or error
information that can be used in troubleshooting the system.
You can access system inventory, Dell Lifecycle Controller logs
or system logs, system health status, and also configure iDRAC,
BIOS, and networking parameters. You can also launch the
virtual Keyboard, Video, and Mouse (KVM) viewer and virtual
Kernel based Virtual Machine (KVM), on a supported mobile
device. For more information, see the Integrated Dell Remote
Access Controller User's Guide at Dell.com/idracmanuals.
Right control panel
The right control panel contains a power switch, USB ports, and iDRAC port and LED and a VGA port.
Figure 4. Right control panel view
Item
Indicator, button, or
connector
Icon Description
1 Power button
Indicates if the system is turned on or off. Press the power
button to manually turn on or off the system.
NOTE: Press the power button to gracefully shut down an
ACPI-compliant operating system.
2 USB port (2)
The USB ports are 4-pin, 2.0-compliant. These ports enable you
to connect USB devices to the system.
3 iDRAC Direct port
The iDRAC Direct (Micro-AB USB) port enables you to access
the iDRAC Direct (Micro-AB) features. For more information,
see the iDRAC User’s Guide at Dell.com/idracmanuals.
4 iDRAC Direct LED N/A The iDRAC Direct LED indicator lights up to indicate that the
iDRAC Direct port is connected. For more information, see the
iDRAC Direct LED indicator codes section.
5 VGA port
Enables you to connect a display device to the system. For more
information, see the Technical speciifcations section.
10 NX3240 system overview