Users Guide
• An entry is displayed in the Jobs section on the VMM console. This entry displays the status of the job as Completed, as shown in the
following gure:
Figure 3. Completed Jobs
PRO Tip implementation of moving VMs can fail if no other healthy hosts are available in the host group or host cluster. In such a case, the
PRO Tip window displays the state of the corresponding PRO Tip as Failed, and the reason is elaborated in the Error section. The status
of the corresponding entry in the Jobs section on the VMM console is also displayed as Failed.
NOTE
: In the PRO Tip window the failure message is updated dynamically. However, to refresh the data, you have to click outside
the PRO Tip window and then click again to bring the window in focus.
If you select Dismiss, the PRO Tip is not executed and the following changes take place:
• The PRO Tip is removed from the VMM PRO Tip console.
• The alert in Operations Manager is removed from the Dell Server PRO Alerts.
For more information, see Using Health Explorer to Reset Alerts.
VM Live Migration
As a connected user, during live migration, you can migrate a VM from one node of a Windows Server 2016, Windows Server 2012 R2,
Windows Server 2012 SP1, Windows Server 2012, and Windows Server 2008 R2 failover cluster to another node in the same cluster
without any downtime or interruption.
The dierence in quick migration and live migration is that there is a downtime in quick migration whereas; there is no downtime in live
migration.
NOTE
: Windows Server 2008 Hyper-V supports quick migration. Windows Server 2008 R2 Hyper-V supports both quick
migration and live migration.
Monitoring using PRO
specic alerts on Operations
Manager
You can monitor the physical devices in your network using the Operations Manager console.
10
Using Dell EMC Server Performance Resource Optimization Pack