Dell EMC Server PRO Management Pack Version 5.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2009 - 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Overview........................................................................................................................................................ 4 Minimum requirements...................................................................................................................................................... 5 Supported Operating Systems.........................................................................................................................................
1 Overview This guide provides information on software pre-requisites and requirements to install and uninstall Dell EMC Server Performance and Resource Optimization Management Pack (PRO Pack) version 5.0. Dell EMC PRO Pack is a tool to monitor the Dell systems and take remedial action when an inefficient system is identified. The Dell EMC PRO Pack version 5.
• Security Considerations Minimum requirements To install and implement the Dell EMC PRO Pack version 5.
To import Dell EMC PRO Pack: 1 Download the Dell_EMC_PROPack_v5.0_A00.exe file from Dell.com/support to a removable media or a local repository. 2 Extract the contents of the file to a folder on the system. 3 Launch the Operations Manager console. 4 On the Administration tab, right-click Management Packs and click Import Management Packs. The Select Management Pack to import window is displayed. 5 Click Add > Add from disk. 6 Browse the location where you extracted the Dell_EMC_PROPack_v5.0_A00.
• A Critical alert is generated when a component has either failed or failure is imminent. Enabling PRO Tips To enable PRO Tips for both Warning and Critical alerts and automatically implement PRO Tips: 1 Launch the VMM console. 2 Click Settings > System Center Settings. 3 Right-click Operations Manager Settings and click Settings. The Operations Manager Settings window is displayed, as shown in the following figure. Figure 1.
Your Actions Expected System Response • Select the Dismiss option instead of the Implement option in the PRO Tip window. Corresponding alert disappears in the Operations Manager Alert View. Dismisses the PRO Tip. No recovery task is performed. The corresponding PRO Tip entry moves out of the PRO Tip window. Upgrading from Previous Management Packs Upgrading from Dell PRO Pack Version 3.0 and 4.0 Version You can upgrade from Dell PRO Pack version 3.0, and version 4.0 by importing the version 5.
2 Accessing documents from the Dell EMC support site You can access the required documents using the following links: • For Dell EMC Enterprise Systems Management documents — Dell.com/SoftwareSecurityManuals • For Dell EMC OpenManage documents — Dell.com/OpenManageManuals • For Dell EMC Remote Enterprise Systems Management documents — Dell.com/esmmanuals • For iDRAC and Dell EMC Lifecycle Controller documents — Dell.
