Dell EMC Server PRO Management Pack Version 5.0 for Microsoft System Center Virtual Machine Manager Installation Guide June 2017 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2009 - 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Overview...................................................................................................................... 4 Minimum requirements....................................................................................................................................................... 4 Supported Operating Systems.........................................................................................................................................
1 Overview This guide provides information on software pre-requisites and requirements to install and uninstall Dell EMC Server Performance and Resource Optimization Management Pack (PRO Pack) version 5.0. Dell EMC PRO Pack is a tool to monitor the Dell systems and take remedial action when an inefficient system is identified. The Dell EMC PRO Pack version 5.
○ Installation of Microsoft System Center 2016 Operations Manager, Microsoft System Center 2012 R2 Operations Manager, Microsoft System Center 2012 SP1 Operations Manager, or Microsoft System Center 2012 Operations Manager on supported hardware and operating system ○ Installation of Microsoft System Center 2016 Virtual Machine Manager, Microsoft System Center 2012 R2 Virtual Machine Manager (VMM), Microsoft System Center 2012 SP1 Virtual Machine Manager (VMM) or Microsoft System Center 2012 Virtual Machine
3. Launch the Operations Manager console. 4. On the Administration tab, right-click Management Packs and click Import Management Packs. The Select Management Pack to import window is displayed. 5. Click Add > Add from disk. 6. Browse the location where you extracted the Dell_EMC_PROPack_v5.0_A00.exe file and select Dell.Connections.hyperv.PROPack.mp and Dell.Connections.hyperv.PROPackExt.mp file. 7. Click Open. The Import Management Packs window is displayed.
Enabling PRO Tips About this task To enable PRO Tips for both Warning and Critical alerts and automatically implement PRO Tips: Steps 1. Launch the VMM console. 2. Click Settings > System Center Settings. 3. Right-click Operations Manager Settings and click Settings. The Operations Manager Settings window is displayed, as shown in the following figure. Figure 1. Configuring PRO Tips Properties 4. Make sure that the Enable Performance and Resource Optimization (PRO) check box is selected. 5.
Table 1. Your actions and Expected system response (continued) Your Actions Expected System Response Select the Dismiss option instead of the Implement option in Dismisses the PRO Tip. No recovery task is performed. The the PRO Tip window. corresponding PRO Tip entry moves out of the PRO Tip window. Upgrading from Previous Management Packs Upgrading from Dell PRO Pack Version 3.0 and 4.0 Version You can upgrade from Dell PRO Pack version 3.0, and version 4.0 by importing the version 5.0 management pack.
2 Accessing support content from the Dell EMC support site Access supporting content related to an array of systems management tools using direct links, going to the Dell EMC support site, or using a search engine. ● Direct links: ○ For Dell EMC Enterprise Systems Management and Dell EMC Remote Enterprise Systems Management—https:// www.dell.com/esmmanuals ○ For Dell EMC Virtualization Solutions—https://www.dell.com/SoftwareManuals ○ For Dell EMC OpenManage—https://www.dell.
