Users Guide

Storage Management
All informational, warning, and critical events for the Server Administrator Storage Management Service have a corresponding
event processing rule.
Each of these rules are processed based on the following criteria:
● Source Name = "Server Administrator"
● Event ID = Actual event ID of the Server Administrator Storage Management Service event
● Data Provider = Windows system event log
View Dell EMC servers performance collection rules set on Operations Manager
In the Operations Manager console, click Monitoring > Dell EMC > Dell EMC Performance and Power Monitoring Views to
view the performance information that is collected from Dell EMC PowerEdge Servers. By default, this feature is disabled. To
enable the feature, see Enabling Performance Collection Rules.
The performance collection rules collect information on the following parameters:
● Disk Performance (%)
● Ambient Temperature (Centigrade)
● Amperage (Amps)
● Energy Consumption (kWh)
● Peak Amperage (Amps)
● Peak Power (Watts)
● Physical Network Interface
● Power Consumption (BTU/hr)
● Power Consumption (Watts)
● Teamed Network Interface
NOTE:
● When the Detailed edition of the Server and Rack Workstation Monitoring feature is imported, the disabled Performance
(excluding Network Performance) and license-free Disk Performance (%) collection rules are enabled by default.
● Disk Performance (%) — This view displays the Remaining Rated Write Endurance of Solid-State Drives (SSDs) of
a Dell server. Search for the object SSD to view the data.
NOTE: Network Statistics are defined in Detailed edition of the Dell EMC Server and Rack Workstation Monitoring feature
only and are disabled by default. To enable the feature, see Enabling Performance Collection Rules.
Enable Dell EMC PowerEdge Server performance collection rules set on Operations Manager console
To enable this feature:
1. Start Operations Manager console and click Authoring.
2. Click Rules and search for Enriched in Look for.
3. Right-click the rule you want to enable.
For example, to collect information on Network Interface of all Dell systems, perform step 4–5 for the rules listed below:
● Total Transmitted Packets
● Received Bytes
● Total Received Packets
● Transmitted Bytes
4. Select Overrides > Override the Rule > For all objects of class.
5. Select Enabled and set the Override Value to True.
6. Under Management Pack, either select a management pack created from the Select destination management pack
drop-down menu or create a new management pack by clicking New.
To create a new management pack:
a. Click New.
The Create a Management Pack screen is displayed.
b. Enter a name for the management pack in Name and click Next.
36
Dell EMC Server Management pack suite version 7.2 supported Monitoring features