Install Guide

d. Right-click Dell Feature Management Host Discovery and select Overrides > Override the Object Discovery >

For all objects of class: Management Server.

e. Select the FMP Host FQDN and set the override value to FQDN of the management server.

f. Click OK.

3. The Dell EMC Feature Management Dashboard shows two entries, each for Dell EMC Server and Rack workstation

Monitoring Feature and Dell EMC Chassis Monitoring Feature with Available Version as 7.1 and 7.2.

NOTE: Ensure that you launch the Registry Editor on the Management server (MS) that had been enrolled previously to

view the registry entry for 7.1 version.

NOTE: If you have not imported Dell EMC Network Switch Monitoring Feature and DRAC Monitoring Feature during 7.1

version upgrade or imported after performing restore, then also you will get to view two entries.

● To remove the monitoring features which have Available Version as 7.1 from Dell EMC Feature Management Dashboard,

perform the below steps:

○ Click the lower left start button to open the Start menu. Type cmd, and then select Command Prompt: Run reg

export HKEY_LOCAL_MACHINE\SOFTWARE\Dell\Dell Server Management Pack Suites

C:\Export.txt

○ After exporting, run the below commands:

￭ reg delete HKEY_LOCAL_MACHINE\SOFTWARE\Dell—prompt you to permanently delete the registry

entry.

￭ reg delete HKEY_LOCAL_MACHINE\SOFTWARE\Dell (Yes/No)?—type Y or N.

NOTE: To get the enrolled MS FQDN, see Restore OMIMSSC appliance.

It takes 10 to 15 minutes to reflect the Dell EMC Feature Management Dashboard with updated Available Version of appliance

after deleting registry entry.

Troubleshooting