Install Guide

Table 6. Deployment Scenario for Operations Manager 2016 and later (continued)
Scenario1: Devices discovery using Operations Manager (SMASH/Network Switch)
Dell EMC devices are discovered as SMASH devices or Network devices in the Operations Manager console. The
inputs for SMASH devices are provided in the SMASH monitoring wizard and for network switches in the network
device discovery wizard of the Operations Manager console.
monitoring Dell
devices that
are mentioned
under Device
count column.
Detailed <=120 No For minimum
hardware
recommendation
for MS, DB, and
the number of
Management
Servers, set
Number of
Network Devices
count to 2000 in
Sizing Guide.
NOTE: This
configuration is
required for
monitoring Dell
devices that
are mentioned
under Device
count column.
NA NA
Yes For minimum
hardware
recommendation
for MS, DB, and
the number of
Management
Servers, set
Number of
Network Devices
count to 2000 in
Sizing Guide.
NOTE: This
configuration is
required for
monitoring Dell
devices that
are mentioned
under Device
count column.
4 Each Proxy MS can
monitor maximum
of 30 devices in
detailed mode and
each Management
Server can be
connected to
maximum of 2
Proxy MS. For
configuration of
Proxy MS, see
Table Proxy MS
Virtual Machine
Configuration
Scenario 2: Devices discovery using Dell EMC OMIMSSC (iDRAC, Chassis, Network Switch)
Dell EMC devices are discovered as iDRAC, Dell EMC Chassis, or Dell EMC Network switches in Dell EMC OMIMSSC console.
The inputs are provided in the Dell EMC OMIMSSC console and during discovery, the IP address range is provided and
appropriate credential profile is associated with the job.
Scalable 600 to multiple
1000+
Yes For minimum
hardware
recommendation
for MS, DB, and
3 Each Proxy MS can
monitor maximum
of 250 devices in
scalable mode and
22 Proxy MS and scalability scenarios for device monitoring