Users Guide

NOTE: If a Run-As-Account community string is not available then create one. See Create Run-As-Account for SNMP
monitoring.
NOTE: If you are using multiple Run-As accounts to discover devices, associate each device with its associated Run-As
account. For more information, see Associate Multiple Run As Accounts.
8. Click OK.
9. After completing tasks prompted by the wizard, click Close.
Create Run-As-Account for SNMP monitoring
Steps
1. Start the SCOM console and select Administration.
2. In the Administration pane, click Run As Configuration > Accounts.
3. Right-click Accounts and click Create Run As Account.
The Introduction screen is displayed.
NOTE: For more information about Run As Account for Network Monitoring, see the Microsoft documentation.
4. Click Next.
The General Properties screen is displayed.
5. Select a community string from the Run As Account type drop-down menu.
6. In the Display name box, enter the community string name and click Next.
7. In the Community string box, enter the community string, and then click Next.
The Distribution Security screen is displayed.
8. Select the Less secure - I want the credentials to be distributed automatically to all managed computers option,
and then click Create.
9. After completing tasks prompted by the wizard, click Close.
Associate multiple Run-As accounts
Steps
1. Complete steps 1–6 in Configuring Operations Manager to monitor Traps and Trap-Based Unit Monitors.
2. On the Add a Run As Account screen, select the A selected class, group, or object option.
3. Click Select > Class.
The Class Search screen is displayed.
NOTE:
You can also associate the community string Run As Account with Object and Group. For more information, see
the Microsoft documentation for SCOM at www.docs.microsoft.com.
4. In the Filter by (optional) box, enter the class name. Based on the type of device, enter Dell EMC Server, Dell
CMC/OME-M, or Dell EMC DRAC/MC.
5. Click Search.
6. Under Available items, select the class you want to add.
7. Click OK.
8. On the Add Run As account screen, click OK.
9. For each class type you want to manage, repeat steps 2−8.
10. Click Save.
11. After completing tasks prompted by the wizard, click Close.
Additional topics
65