Users Guide

Alert view in the monitoring feature of DSMPS using iSM-WMI
This view is available for managing hardware and storage events from the Dell EMC Server and Rack Workstation Monitoring
feature using iSM-WMI. Link-up and Link-down alerts for events that are received from the Broadcom and Intel Network
Interface Cards (NICs) are displayed.
To view the alert views that are displayed by the monitoring feature of DSMPS for PowerEdge servers and workstations using
iSM-WMI:
1. In the left pane of the SCOM console, select Monitoring.
2. Expand Dell EMC > Dell EMC Alerts Views. The following alerts are displayed:
● Dell EMC Network Interface Alerts Views—Link-up and Link-down alerts from the discovered NICs.
● Dell EMC Server and Rack Workstation Alerts Views—SNMP traps for 12th, 13th, generation, and iDRAC9-based
PowerEdge servers, PowerVault servers, and Dell Precision Racks with iDRAC7, iDRAC8, or iDRAC9 are displayed.
● Dell EMC Rack Workstation Alert Views
○ Dell EMC Network Interface Alerts—Link-up and Link-down alerts from the discovered NICs.
○ Dell EMC Rack Workstation Alerts
See Alert views displayed by different monitoring features of DSMPS on page 46.
3. Select the required Alert View. In the right pane, alerts that meet the criteria—such as alert severity, resolution state, or
alerts that are assigned to you—are displayed.
4. Select an alert to view the details in the Alert Details section.
Diagram views in the monitoring feature of DSMPS using iSM-WMI
About this task
The Dell EMC Diagram Views offer a hierarchical and graphical representation of all Dell EMC PowerEdge Servers and supported
Rack Workstations on the network.
Steps
1. In the left pane of the SCOM console, select Monitoring.
2. Expand Dell EMC > Dell EMC Diagram Views.
3. Go to the Dell EMC Diagram Views folder to view the available diagram views. See Diagram views displayed by different
monitoring features of DSMPS on page 47.
4. Select a required Dell EMC Diagram View to view the hierarchical and graphical representation of the selected Dell EMC
Server or Rack Workstation in the right pane.
5. Select a component in the diagram to view its details in the Detail View section.
Performance and power monitoring views in the monitoring feature of
DSMPS using iSM-WMI
About this task
To view the Dell EMC performance and power monitoring views on the SCOM console:
Steps
1. In the left pane of the SCOM, select Monitoring.
2. In the Monitoring pane, expand Dell EMC > Dell EMC Performance and Power Monitoring Views.
The following Performance and Power Monitoring views are available:
● Dell Performance View (iSM)
● Disk Performance - iSM (%)
NOTE:
All performance metric rules are disabled by default for Dell EMC Server and Rack Workstation Monitoring
feature.
3. To view the System Board Usage metrics, click Dell EMC Performance and Power Monitoring > Dell EMC System
Board Usage for the following views:
● CPU Usage - iSM (%)
Discover and manage PowerEdge servers on the SCOM console by using iSM-WMI
19