Users Guide

Alert view in the monitoring feature of DSMPS for PowerEdge servers and
rack workstations
The Alert View is available for managing hardware and storage events from the Dell EMC servers and rack workstations, which
are received from OpenManage Server Administrator (OMSA). Link-up and Link-down alerts for events that are received from
the Broadcom and Intel Network Interface Cards (NICs) are displayed.
To view the alert views that are displayed by the monitoring feature of DSMPS for PowerEdge servers and workstations:
1. On the SCOM console, select Monitoring.
2. Expand Dell EMC > Dell EMC Alerts Views. The alert views displayed by the monitoring feature of DSMPS for PowerEdge
servers and rack workstations are:
● Dell EMC Network Interface Alerts Views—Link-up and Link-down alerts from the discovered NICs.
● Dell EMC Server and Rack Workstation Alerts Views—OMSA alerts from the Dell Server and Rack Workstations.
● Dell EMC Rack Workstation Alert Views
○ Dell EMC Network Interface Alerts—Link-up and Link-down alerts from the discovered NICs.
○ Dell EMC Rack Workstation Alerts—OMSA alerts from Rack Workstations.
See Alert views displayed by different monitoring features of DSMPS on page 46.
3. Select the required Alert View. In the right pane, alerts that meet the criteria—such as alert severity, resolution state, or
alerts that are assigned to you—are displayed.
4. Select an alert to view the details in the Alert Details section.
NOTE: By default, informational alerts are disabled. To enable informational alerts, run the Set Informational Alerts On
task for the Server and Rack Monitoring feature on the Dell EMC Feature Management Dashboard.
Diagram views in the monitoring feature of DSMPS for PowerEdge servers
and rack workstations
About this task
The Dell EMC Diagram Views offer a hierarchical and graphical representation of all Dell EMC PowerEdge servers and supported
rack workstations on the network.
Steps
1. In the left pane of the SCOM console, select Monitoring.
2. Expand Dell EMC > Dell EMC Diagram Views.
3. Go to the Dell EMC Diagram Views folder to view the available diagram views. See Diagram views displayed by different
monitoring features of DSMPS on page 47.
4. Select a required Dell EMC Diagram View to view the hierarchical and graphical representation of the selected Dell EMC
server or rack workstation in the right pane.
5. Select a component in the diagram to view its details in the Detail View section.
Performance and power monitoring views in the monitoring feature of
DSMPS for PowerEdge servers and rack workstations
About this task
To view the Dell EMC performance and power monitoring views on the SCOM console:
Steps
1. In the left pane of the SCOM, select Monitoring.
2. In the Monitoring pane, expand Dell EMC > Dell EMC Performance and Power Monitoring Views.
The following Performance and Power Monitoring views are available:
● Ambient Temperature (Centigrade)
● Amperage (Amps)
● Dell EMC Performance View
● Dell EMC Performance View (iSM)
Discover and manage PowerEdge servers on the SCOM console by using the monitoring feature of DSMPS
13