Users Guide

Server port connection information
Server port connection information feature provides details of the physical mapping of switch ports to server ports, and iDRAC dedicated
port connections. This feature helps you to reduce cabling error debugging by identifying which switch ports are connected to a server’s
network ports, and iDRAC dedicated port.
You can view the details of the Server port connection information under iDRAC NIC and NIC objects in the Detail View pane of the Dell
EMC Diagram View. Along with the inventory information of each NIC; chassis ID information of the switch and the port ID information is
populated.
This feature is available for Dell EMC PowerEdge servers discovered through both, the iDRAC and iSM methods of Dell EMC Server and
Rack Workstation Monitoring (Licensed) feature.
NOTE: This feature is supported for 14th generation of the PowerEdge Servers only.
Unit monitors for Dell EMC Servers and Rack workstations (Licensed)
feature—iDRAC–WS-MAN
Monitors to assess various conditions that can occur in the monitored objects.
Table 26. Dell Unit Monitors for Dell EMC Server and Rack Workstation Monitoring (Licensed) feature
Object Unit Monitor
Dell EMC PowerEdge Server
Dell Server Run As Account Association Periodic
Dell Server Unit Monitor Periodic
Dell Server Power Supply
Dell Server Power Supply Unit Periodic
Dell Server Processor Group
Dell Server Processor Group Periodic
Dell Server Chassis Controller Sensor
Dell Server Chassis Controller Sensor Periodic
Dell Storage Controller
Dell Server Storage Controller Periodic
Dell Server Controller Battery
Dell Server Controller Battery Unit Periodic
Dell Battery Sensor
84 Dell EMC OMIMSSC version 7.1 supported monitoring features