Users Guide
Features Scalable Edition Detailed Edition
• Reports—Only OpenManage Windows
Event log report is available.
controllers, disks, and virtual disks. Also,
displays BIOS information.
• Reports—Availability of BIOS
conguration, rmware and driver version,
and RAID conguration reports
Discover and classify Dell EMC PowerEdge Servers by using
DSMPS version 7.1 for Operations Manager
The Dell EMC Server Management Pack 7.1 for Microsoft System center Operations Manager enables you to discover and classify Dell
EMC PowerEdge Servers—Monolithic, Modular, Sleds, and supported Dell Precision Racks. The following table lists the details of the
hardware discovery and grouping:
Table 6. Dell hardware discovery and grouping
Group Diagram View Hardware Type
Dell EMC PowerEdge Servers
Dell EMC Monolithic Servers
Dell EMC Modular Servers
Dell EMC Sled Servers
PowerEdge systems
PowerVault servers
Dell EMC Rack Workstations Dell EMC Rack Workstation Diagram Dell Precision Racks
Discovering Dell EMC PowerEdge Servers by using Dell EMC OMIMSSC
Operations Manager
You can discover the Dell EMC PowerEdge Servers in OMIMSSC for Operations Manager by using an IP address or an IP range. To
discover servers, provide the iDRAC IP address and the device type credentials of a server. When you are discovering servers by using an
IP range, specify an IP (IPv4) range within a subnet by including the start and end range.
To discover servers:
1 In Dell EMC OMIMSSC, click Monitoring > Server View, and then click Discover.
2 In the Discover page, select the required option:
• Discover Using an IP Address—to discover a server using an IP address.
• Discover Using an IP Range—to discover all server within an IP range.
3 In Discover Using an IP Address or IP Address Range, do any of the following:
• In IP Address Start Range, and IP Address End Range, provide the IP address range you want to include, which is the starting
and ending range.
• Select Enable Exclude Range if you want to exclude an IP address range and in IP Address Start Range and IP Address End
Range, provide the range that you want to exclude.
4 In Apply this Credential Prole, select the device type credential prole.
The selected prole is applied to all the servers.
5 To Create a new credential prole, Select Create New to create a device type credential prole
Credential prole page is displayed.
6 Select the Device Credential Prole in the credential type.
The Credentials elds get enabled.
Dell EMC Server Management pack suite version 7.1 supported Monitoring features
21