Users Guide
Deleting credential prole
Consider the following when you are deleting a credential prole:
• To delete a credential prole that is used in device discovery, delete the discovered device's information and delete the credential prole.
• You cannot delete a credential prole if it is used in an update source.
To delete a credential prole, perform the following:
1 Launch the OpenManage Integration Dashboard under Dell EMC OpenManage Integrations Views.
2 Log in into the Dell EMC OMIMSSC. Go to Proles and Conguration > Credential Prole.
3 Select the credential prole that you want to delete, and then click Delete.
Discovering Dell EMC devices and synchronizing with
Operations Manager
Discovery is the process of adding supported Dell EMC devices comprising of Dell EMC PowerEdge servers, Dell EMC chassis, and Dell
EMC Network switches in OMIMSSC, and synchronizing with Operations Manager allows you to add devices from Operations Manager
into OMIMSSC.
Discovering Dell EMC devices in OMIMSSC
You can manually discover the Dell EMC devices by using an IP address or an IP range. To discover a device, provide the device IP address
and the device type credentials of a device that you want to discover. When you are discovering a device by using an IP range, specify an
IP (IPv4) range (within a subnet) by including the start and end range.
To discover a device:
1 Select OpenManage Integration Dashboard under Dell EMC OpenManage Integrations Views.
2 In the OMIMSSC, go to Monitoring and select any of the following devices that you want to discover:
• Server View.
• Modular Systems View.
• Network Switch View.
3 In the Discover page, select the required option:
• Discover Using an IP Address—to discover a device using an IP address.
• Discover Using an IP Range—to discover all device within an IP range.
You can discover maximum of 250 devices in one job and the successive jobs can be triggered in an interval of one hour.
4 In Discover Using an IP Address or IP Address Range, do any of the following:
• In IP Address Start Range, and IP Address End Range, provide the IP address range that you want to include, which is the
starting and ending range.
• Select Enable Exclude Range if you want to exclude an IP address range and in IP Address Start Range and IP Address End
Range, provide the range that you want to exclude.
5 In IP address, provide the IP address of the device that you want to discover.
6 Select the device type credential prole, or click Create New to create a device type credential prole.
The selected prole is applied to all the devices.
7 To Create a new credential prole, Select Create New to create a device type credential prole.
Credential prole page is displayed.
8 Select the Device Credential Prole in the credential type.
The Credentials elds get enabled.
12
Dell EMC OMIMSSC