Users Guide

Issue Resolution Applicable To
Correlation Discovery object
discovery.
b Disable the object discovery
corresponding to the method used
for discovering the modular
servers. For example: If the
duplicate object is discovered
through OMSA, then go to
Authoring > Object Discoveries
and then search for Dell
Server Discovery; which is
targeted at the Windows
Computer and disable the
Discovery attribute for that object.
NOTE: In case the
duplicate object has been
created for Dell EMC
servers, then disable the
following object discoveries
for FM servers:
• Dell EMC FM
Server Agent-
based Discovery
• Dell EMC FM
Server Agent-free
Discovery
• Dell EMC FM
Server iSM
Discovery
3 Run the following command from the
Operations Manager Shell:
Remove-
SCOMDisabledClassInstance
NOTE
: This step may take
up to 48 hours to complete.
The Agent proxy not enabled alerts are
displayed in the Active Alerts list for the
Dell EMC PowerEdge Servers that are
discovered through iSM.
To resolve this issue, perform the following
steps:
1 Go to the Dell EMC Feature
Management Dashboard, and click Dell
EMC Server and Rack Workstation
Monitoring (Licensed).
2 In the right pane, under Dell Monitoring
Feature Tasks, click Enable Agent
Proxying.
The Run Task - Enable Agent Proxying
window is displayed.
3 Click Override, and then click the eld
under New Value for the AutoResolve
Warnings/Errors parameter and set the
value as True.
4 Now click Override and then click Run.
5 Close the task status window.
Clear the existing alerts from the active alerts
list. These alerts will no longer be displayed
for future discoveries.
Dell EMC Server and Rack Workstation
Monitoring (Licensed) Feature
108 Appendix A—Issues and resolutions