Release Notes

• Issue 2
Description: Despite updating the default port number, CMC, or DRAC running rmware version 3.0 returns the wrong URL.
Resolution: None
Version aected: Dell EMC OpenManage Integration v7.1 for Microsoft System Center for Operations Manager (Dell EMC Chassis
Monitoring and DRAC Monitoring Feature).
• Issue 3
Description: Dell EMC PowerEdge Servers that are discovered through the Dell EMC Server and Rack Workstation Monitoring feature
are shown with the default logical device icon.
Resolution: None
Version aected: Dell EMC OpenManage Integration v7.1 for Microsoft System Center for Operations Manager (Dell EMC Server and
Rack Workstation Monitoring Feature).
• Issue 4
Description: If the component is under a Software RAID controller, Inventory for Bus Type and Media Protocol in Virtual Disk are not
supported.
Resolution: Please see the iDRAC documentation for updated support.
Version aected: All
• Issue 5
Description: The Fan components of the Dell EMC PowerEdge M1000e chassis are displayed as Dell Fan.
Resolution: Upgrade the Dell EMC PowerEdge M1000e rmware to version 5.0.1
Version aected: All
• Issue 6
Description: Inventory eld Manufacturer for SATA Disks may be incorrectly reported as ATA.
Resolution: None
Version aected: Dell EMC OpenManage Integration v7.1 for Microsoft System Center for Operations Manager.
• Issue 7
Description: NIC Inventory eld for Virtual MAC Address are displayed as "00:00:00:00:00:00", if Virtual MAC Address has not been
congured for the NIC. This issue aects the Dell EMC Server and Rack Workstation Monitoring (Licensed) feature in version 6.3 and
the out of band or the agent-based monitoring feature of versions 6.0 and later.
Resolution: None
Version aected: Dell EMC OpenManage Integration v7.1 for Microsoft System Center for Operations Manager.
• Issue 8
Description: When Dell EMC PowerEdge M1000e chassis is discovered with controller who is inserted in slot2, and slot1 is empty, then
the value of the rmware version is displayed as Not Applicable.
Resolution: Insert the controller in SLOT1
Version aected: Dell EMC OpenManage Integration v7.1 for Microsoft System Center for Operations Manager.
• Issue 9
Description: The Deletion of devices from appliance to Operations Manager can take a long time depending on the number of devices
that are deleted at a time.
Resolution: Select small set of devices for deletion at a time. Wait for few minutes after the completion of a deletion task and then go
to trigger the next deletion.
10
Dell EMC OpenManage Integration Version 7.1 for Microsoft System Center for Operations Manager (SCOM)
Release Notes