Install Guide
NOTE: It is recommended that you wait for ve minutes before you log in as an Admin so that all services are initiated.
1 In localhost login: Type admin.
2 In Enter new Admin password: Type a password.
3 In Please conrm new Admin password: retype the password, and press Enter to continue.
The Black console wizard is displayed.
Figure 1. Black Console wizard
4 In Appliance, select Congure Network, press Enter, and perform the following substeps:
a Select Edit a connection, and press Enter.
b Select the Ethernet connection you want to edit and then select Edit and press Enter.
c Select IPv4 CONFIGURATION > <Show> and press Enter.
d In DNS servers, type the DNS IP address, and then press OK.
e Select Back and press Enter.
f Select Set system hostname and press Enter.
g In Hostname, type the FQDN of the host and then press OK. For example, Hostname.domain.com.
NOTE
: You can change the IP address of Appliance by selecting Device conguration option. Do not change
the host name of Appliance after this point.
h Select Quit and then press Enter.
5 From Appliance, note the Admin portal URL.
18
Installing, conguring, and managing OMIMSSC