Users Guide

Object Unit Monitor

Controller Global Status Periodic

Controller Global Storage Status Periodic

iDRAC8 Modular

NOTE: For iDRAC8 modular and monolithic servers, the Dell RAC periodic-based and Dell RAC triggered-based unit

monitors are disabled.

Dell Remote Access Status Periodic

Controller Global Status Periodic

Controller Global Storage Status Periodic

iDRAC8 Monolithic

Dell Remote Access Status Periodic

Controller Global Status Periodic

Controller Global Storage Status Periodic

Rules

The following section lists the rules specific to the Dell DRAC monitoring feature.

Dell Systems Event Processing Rules

The Dell EMC Server Management Pack Suite processes rules from DRAC traps.

DRAC Devices

All informational, warning, and critical SNMP traps for the DRAC devices have a corresponding SNMP trap rule.

Each of these rules are processed based on the following criteria:

• Source Name = "DRAC/CMC name or ip"

• OID = Actual trap ID of the DRAC /CMC SNMP trap event

• Data Provider = SNMP trap

NOTE:

Informational alerts are turned off by default. To receive these alerts, import informational alerts management

pack.

Dell EMC PowerEdge Server Tasks

Tasks are available in the Tasks pane of the Operations Manager console. When you select a device or a component, the relevant tasks is

displayed in the Tasks pane.

Summary of managed Tasks

You can view the Tasks in the Authoring pane under Management Pack Objects in the Operations Manager console.

Performing tasks using DRAC

Following table provides a summary of the tasks that are performed using the DRAC:

Dell EMC Server Management pack suite version 7.1.1 supported Monitoring features