Install Guide

Discovery and monitoring of the Dell EMC device

fail after restarting the Dell EMC OMIMSSC

When OMIMSSC restarts, the connectivity between the Operations Manager and the OMIMSSC Appliance is lost. Once the Appliance is

started, then all the discovery and monitoring of the Dell EMC device is restored after the next discovery and monitoring cycle

respectively.

NOTE: The default discovery and the monitoring cycle is 24 hours.

If you want to start the discovery and monitoring of the Dell EMC device before the 24 hours cycle, you can change the override values.

To change the override values, do the following:

• Log in into the Dell EMC OMIMSSC.

• Select Profiles and Configuration > Configuration.

• Click Edit tab and select the device to edit the override value.

• In the discovery interval column, edit the override value and click Apply.

• The discovery is triggered again immediately after changing the override values.

• (Optional) you can view the applied changes by going to the Jobs and Logs Center > Scheduled jobs.

Event ID 33333: Data Access Layer rejected retry

on SqlError

Warning event with the event id 33333 is generated on Management server when iSM Management Pack tries to discover Proxy Agents.

To suppress this event, you need to disable the iSM discovery that is targeted on proxy agents.

To disable the iSM discovery that is run on proxy agent and to suppress the event ID 33333 from getting regenerated, perform the

following steps:

1. Log in into the Operations Manager console.

2. On the lower left pane, select Authoring > Management Pack Objects > Object Discoveries.

3. In the Look for field, search for iSM.

4. Select Discovered type: Dell Sever > Dell Sever Discovery.

5. Right click Dell Sever Discovery and select Overrides > Override the Object Discovery > For a Group.

The Select Object wizard is displayed.

6. Select the DellProxyMSGroup and Click OK.

Dell EMC Feature Management Dashboard does

not populate

In a distributed setup, the management server where the Dell EMC Server Management Pack is installed first, is selected to host all

feature management activities such as discoveries, alerts, and tasks. The management server on which the Dell EMC Server Management

Pack is installed first populates the Dell EMC Feature Management Dashboard. However, if you have manually imported the Feature

Monitoring management pack without running the installer on the management server, the Feature Management Pack host is not

selected and hence, the Dell EMC Feature Management Dashboard does not populate.

To populate the Dell EMC Feature Management Dashboard:

1. In the Operations Manager console, click Authoring.

2. In Authoring, expand Management Pack Objects.

3. Click Object Discoveries.

4. In the Look for: field, search Dell Feature Management Host Discovery.

5. Right-click Dell Feature Management Host Discovery and select Overrides > Override the Object Discovery > For all objects

of class: Dell Feature Management Host Discovery

6. To run the feature management activities, select FmpHostFqdn and set the override value to FQDN of the management server.

Troubleshooting