Install Guide

By default, the management packs are installed in the location; C:\Program Files\Dell Management Packs\Server
Mgmt Suite\7.1.
The following monitoring features are automatically imported into Operations Manager after the installation of Dell EMC Server
Management Pack:
• Dell EMC Server and Rack Workstation Monitoring feature
• Dell EMC Server and Rack Workstation Monitoring (Licensed) feature — (only iSM based), if all the prerequisites are met.
• Dell EMC Feature Management Pack The Dell EMC Feature Management Dashboard is displayed under Monitoring > Dell EMC
on the Operations Manager console. See the individual monitoring sections for importing the monitoring features.
NOTE: The Dell EMC Server and Rack Workstation Monitoring (Licensed) feature requires the installer to run on all
the management servers that are used to monitor the Dell EMC PowerEdge Servers.
A log file containing the installation information is generated after the installation of Dell EMC Server Management Pack. The log file is
available in the folder where Dell_EMC_Server_Management_Pack.exe is extracted.
Install the Dell Server Management pack Suite patch v7.1.1
using .msp file
CAUTION: The patch installation is applicable only for the users of System Center Operations Manager 2019 or System
Center Operations Manager 1807 or System Center Operations Manager 1801.
.
To install the patch, perform the following steps:
1. Launch the Dell_EMC_Server_Management_Pack_Suite_v7.1.1_patch_x64. msp file from the extracted location.
The Dell EMC Server Management Pack Suite patch - InstallShield wizard is displayed.
2. Click Update, and then click Finish.
3. Post patch update, the feature management pack is automatically imported.
NOTE:
If you have not installed Dell EMC Server Management Pack Suite version 7.1 or when the program to be
upgraded is missing, then an error message is shown as the upgrade patch 7.1.1 cannot be installed by windows
installer service.
Optional, to view the Feature Management Pack latest versions, go to Administration > Management packs > Installed
Mangement Packs.
Installing Dell EMC Server Management Pack on
multiple management servers
To install Dell EMC Server Management Pack on multiple management servers:
1. Import the Management Packs using the Dell EMC Feature Management Dashboard or import the Management Packs using the
Operations Manager Import Management Pack wizard on any of the management servers. Operations Manager automatically
distributes the management packs to all the management servers.
2. To receive traps, add the management server used for discovering the Dell EMC Device to the Dell device’s trap destination list.
NOTE:
Trap destination is automatically configured for the Dell EMC devices discovered and monitored through Dell
EMC Server and Rack Workstation Monitoring (Licensed) feature.
To be able to receive SNMP alerts from devices discovered through the iDRAC access via the Host OS feature, you
must install SNMP services on the Managed Node and set the Management Server IP address as the trap destination
in the SNMP Services. For more information, see monitoring iDRAC access via Host OS in the Dell EMC Server
Management Pack Version 7.1.1 for Microsoft System Center Operations Manager User's Guide.
Install DSMPS 27