Install Guide

Table 9. Deployment Scenario for Operations Manager 2016 and later (continued)
Scenario1: Devices discovery using Operations Manager (SMASH/Network Switch)
Dell EMC devices are discovered as SMASH devices or Network devices in the Operations Manager console. The inputs for
SMASH devices are provided in the SMASH monitoring wizard and for network switches in the network device discovery
wizard of the Operations Manager console.
are mentioned
under Device
count column.
Detailed <=120 No For minimum
hardware
recommendation for
MS, DB, and the
number of
Management
Servers, set
Number of
Network Devices
count to 2000 in
Sizing Guide.
NOTE: This
configuration
is required for
monitoring Dell
devices that
are mentioned
under Device
count column.
NA NA
Yes For minimum
hardware
recommendation for
MS, DB, and the
number of
Management
Servers, set
Number of
Network Devices
count to 2000 in
Sizing Guide.
NOTE: This
configuration
is required for
monitoring Dell
devices that
are mentioned
under Device
count column.
4 Each Proxy MS can
monitor maximum of
30 devices in
detailed mode and
each Management
Server can be
connected to
maximum of 2 Proxy
MS. For
configuration of
Proxy MS, see Table
Proxy MS Virtual
Machine
Configuration
Scenario 2: Devices discovery using Dell EMC OMIMSSC (iDRAC, Chassis, Network Switch)
Dell EMC devices are discovered as iDRAC, Dell EMC Chassis, or Dell EMC Network switches in Dell EMC OMIMSSC console. The
inputs are provided in the Dell EMC OMIMSSC console and during discovery, the IP address range is provided and appropriate credential
profile is associated with the job.
Scalable 600 to multiple
1000+
Yes For minimum
hardware
recommendation for
MS, DB, and the
number of
Management
3 Each Proxy MS can
monitor maximum of
250 devices in
scalable mode and
each Management
Server can be
22 Proxy MS and scalability scenarios for device monitoring