Users Guide

Table 21. Dell Unit Monitors for DRAC Monitoring Feature (continued)
Object Unit Monitor
NOTE: For iDRAC7 modular and monolithic servers, the Dell RAC periodic-based and Dell RAC triggered-based unit
monitors are disabled.
Dell Remote Access Status Periodic
Controller Global Status Periodic
Controller Global Storage Status Periodic
iDRAC7 Monolithic
Dell Remote Access Status Periodic
Controller Global Status Periodic
Controller Global Storage Status Periodic
iDRAC8 Modular
NOTE: For iDRAC8 modular and monolithic servers, the Dell RAC periodic-based and Dell RAC triggered-based unit
monitors are disabled.
Dell Remote Access Status Periodic
Controller Global Status Periodic
Controller Global Storage Status Periodic
iDRAC8 Monolithic
Dell Remote Access Status Periodic
Controller Global Status Periodic
Controller Global Storage Status Periodic
Rules
The following section lists the rules specific to the Dell DRAC monitoring feature.
Dell Systems Event Processing Rules
The Dell EMC Server Management Pack Suite processes rules from DRAC traps.
DRAC Devices
All informational, warning, and critical SNMP traps for the DRAC devices have a corresponding SNMP trap rule.
Each of these rules are processed based on the following criteria:
● Source Name = "DRAC/CMC name or ip"
● OID = Actual trap ID of the DRAC /CMC SNMP trap event
● Data Provider = SNMP trap
NOTE: Informational alerts are turned off by default. To receive these alerts, import informational alerts management pack.
68 Dell EMC Server Management pack suite version 7.1.1 supported Monitoring features