Users Guide

To view the performance graph for the capacity planning feature:
1. Click Monitoring > Dell EMC > Dell EMC Performance and Power Monitoring Views > Dell EMC System Board
Usage > Overall System Usage - iSM (%).
2. Select Capacity Check System Board Average Sys Usage(last day) under the Counter column for the desired Dell
EMC device and select the time range for the values required
.
The data collected is represented in a graphical format for the selected Dell EMC device.
This feature is available for Dell EMC PowerEdge servers discovered through both, the iDRAC and iSM methods of Server and
Rack Workstation Monitoring (Licensed) feature.
iDRAC detection of failed CMC/OME-M
Using the feature; iDRAC detection of a failed Dell EMC Chassis Management Controller/OpenManage Enterprise Modular
(CMC/OME-M) , the iDRAC of a Rack Style Management (RSM) enabled modular server detects a failed or an unavailable
chassis controller. By using this feature, you can take immediate remedial action to bring the failed Dell EMC CMC/OME-M to a
normal state.
The Dell Chassis Controller Sensor indicates the presence or failure of a Dell EMC CMC/OME-M.
You can view the health state obtained from the unit monitor; Dell Chassis Controller Sensor under Sensors in Dell EMC
Diagram Views.
NOTE:
● The Dell Chassis Controller Sensor is available in both; Scalable and Detailed Management Pack.
● iDRAC detection of failed Dell EMC CMC/OME-M is supported for 14th generation of the PowerEdge FX2 Chassis only.
Server port connection information
Server port connection information feature provides details of the physical mapping of switch ports to server ports, and iDRAC
dedicated port connections. This feature helps you to reduce cabling error debugging by identifying which switch ports are
connected to a server’s network ports, and iDRAC dedicated port.
You can view the details of the Server port connection information under iDRAC NIC and NIC objects in the Detail View pane
of the Dell EMC Diagram View. Along with the inventory information of each NIC; chassis ID information of the switch and the
port ID information is populated.
This feature is available for Dell EMC PowerEdge servers discovered through both, the iDRAC and iSM methods of Dell EMC
Server and Rack Workstation Monitoring (Licensed) feature.
NOTE: This feature is supported for 14th generation of the PowerEdge Servers only.
Dell Unit Monitors for Dell EMC Server and Rack Workstation Monitoring
(Licensed) feature—iSM–WMI
Monitors to assess various conditions that can occur in the monitored objects.
Table 17. Dell Unit Monitors for Dell EMC Server and Rack Workstation Monitoring (iSM–WMI) feature
Object Unit Monitor
Dell EMC PowerEdge Server
Dell Server Run As Account Association Periodic
Dell Server Unit Monitor Periodic
Dell Server Power Supply
Dell Server Power Supply Unit Periodic
Dell EMC Server Management pack suite version 7.1.1 supported Monitoring features 57