Users Guide

Table 37. Issues and resolutions (continued)
Issue Resolution Applicable To
a. Disable the Dell EMC Chassis
to the Modular Blade Server
Correlation Discovery object
discovery.
b. Disable the object discovery
corresponding to the method
used for discovering the modular
servers. For example: If the
duplicate object is discovered
through OMSA, then go to
Authoring > Object Discoveries
and then search for Dell
Server Discovery; which
is targeted at the Windows
Computer and disable the
Discovery attribute for that
object.
NOTE: In case the duplicate object
has been created for Dell EMC
servers, then disable the following
object discoveries for FM servers:
● Dell EMC FM Server
Agent-based Discovery
● Dell EMC FM Server
Agent-free Discovery
● Dell EMC FM Server iSM
Discovery
3. Run the following command from the
Operations Manager Shell:
Remove-
SCOMDisabledClassInstance
NOTE:
This step may take up to
48 hours to complete.
The Agent proxy not enabled alerts
are displayed in the Active Alerts list
for the Dell EMC PowerEdge Servers
that are discovered through iSM.
To resolve this issue, perform the
following steps:
1. Go to the Dell EMC Feature
Management Dashboard, and click Dell
EMC Server and Rack Workstation
Monitoring (Licensed).
2. In the right pane, under Dell
Monitoring Feature Tasks, click
Enable Agent Proxying.
The Run Task - Enable Agent
Proxying window is displayed.
3. Click Override, and then click the field
under New Value for the AutoResolve
Warnings/Errors parameter and set
the value as True.
4. Now click Override and then click Run.
5. Close the task status window.
Clear the existing alerts from the active
alerts list. These alerts will no longer be
displayed for future discoveries.
Dell EMC Server and Rack Workstation
Monitoring (Licensed) Feature
Appendix A—Issues and resolutions 105