Users Guide

Issue Resolution Applicable To
b Disable the object discovery
corresponding to the method used
for discovering the modular
servers. For example: If the
duplicate object is discovered
through OMSA, then navigate to
Authoring > Object Discoveries
and then search for Dell
Server Discovery; which is
targeted at the Windows
Computer and disable the
Discovery attribute for that object.
NOTE: In case the
duplicate object has been
created for FM servers,
then disable the following
object discoveries for FM
servers:
• Dell FM Server
Agent-based
Discovery
• Dell FM Server
Agent-free
Discovery
• Dell FM Server
iSM Discovery
3 Run the following command from the
Operations Manager Shell:
Remove-
SCOMDisabledClassInstance.
NOTE
: This step may take
up to 48 hours to complete.
The Agent proxy not enabled alerts are
displayed in the Active Alerts list for the
Dell servers discovered through iSM.
To resolve this issue, perform the following
steps:
1 Navigate to the Feature Management
Dashboard, and click Server and Rack
Workstation Monitoring (Licensed).
2 In the right pane, under Dell Monitoring
Feature Tasks, click Enable Agent
Proxying.
The Run Task - Enable Agent Proxying
window is displayed.
3 Click Override, and then click the eld
under New Value for the AutoResolve
Warnings/Errors parameter and set the
value as True.
4 Now click Override and then click Run.
5 Close the task status window.
Clear the existing alerts from the active alerts
list. These alerts will no longer be displayed
for future discoveries.
Server and Rack Workstation Monitoring
(Licensed) Feature
In the Diagram View for Dell network
devices, the basic attributes are not
displayed for the Dell DRAC and chassis
objects.
To resolve this issue, you can view the
detailed set of attributes by clicking the
objects in the State View.
Chassis Monitoring Feature
98 Appendix A—Issues and resolutions