Users Guide
Viewing Alerts on the OpsMgr Console
To view the alerts on the OpsMgr console:
1 Launch the OpsMgr console and click Monitoring.
2 Click Dell > Alerts Views.
The following alerts are displayed:
• Network Interface Alerts — Link-up and Link-down alerts from the discovered NICs are displayed.
• Server and Rack Workstation Alerts — SNMP traps for 12th, 13th, and 14th generation of PowerEdge servers, PowerVault
storage servers and Dell Precision Racks with iDRAC7, iDRAC8 or iDRAC9 are displayed.
• Dell Rack Workstation Alert Views
• Network Interface Alerts— Link-up and Link-down alerts from the discovered NICs are displayed.
• Rack Workstation Alerts
3 Select any of the Alerts Views.
On the right pane of each of the individual Alerts Views, alerts that meet the criteria you specify, (such as alert severity, resolution
state, or alerts that are assigned to you) are displayed.
4 Select an alert to view its details in the Alert Details pane.
Diagram Views
The Diagram Views oers a hierarchical and graphical representation of all Dell servers and supported Rack Workstations on the network.
Viewing Diagram Views on the OpsMgr console
To view the diagram views on the OpsMgr console:
1 Launch the OpsMgr console and click Monitoring > Dell > Diagram Views.
2 Navigate to the Diagram Views folder for the following views:
• Complete Diagram View
• Dell Rack Workstation Diagram Views
• Rack Workstation Diagram
• Dell Server Diagram Views
• Modular Systems Diagram
• Monolithic Servers Diagram
• Sled Servers Diagram
3 Select any of the Diagram Views.
On the right pane the hierarchical and graphical representation of the selected Dell server or Rack Workstation is displayed.
4 Select a component in the diagram to view its details in the Detail View pane.
Diagram view for Dell servers discovered through iSM using WMI.
The following gure represents the servers discovered through iSM using WMI in the Diagram View:
Server and Rack Workstation Monitoring (Licensed) Feature
59