Users Guide

You can view the status for the following groups:

• Servers and Rack Workstations (Licensed)

• Dell Rack Workstation State Views

• Managed Rack Workstation (Licensed)

• Dell Server State Views

• FM Servers

• Sled Servers (Licensed)

• Unmanaged Servers (Licensed)

The health of a component is derived by reviewing the unresolved alerts associated with the component. Severity Level Indicators explains

the various state components that the Dell EMC Server Management Pack Suite uses with their corresponding severity levels.

Key features of Server and Rack Workstation Monitoring (Licensed)

Feature

This section lists the key features for servers discovered through Server and Rack Workstation Monitoring (Licensed) feature.

• System Conguration Lockdown Mode

• iDRAC Group Manager

• Event Auto Resolution

• Capacity Planning

• iDRAC detection of failed CMC

• Server Port Connection Information

System Conguration Lockdown Mode

System Conguration Lockdown mode feature is available in iDRAC for 14th generation of the PowerEdge servers which locks the system’s

conguration including rmware updates. Once, the System Conguration Lockdown Mode is enabled, you cannot change the system’s

conguration. This feature is intended to protect the system from unintentional changes. Using iDRAC console, you can enable or disable

the System Conguration Lockdown mode.

When the System Conguration Lockdown mode is enabled, you cannot congure the trap destination information in the servers. Hence,

alerts are not generated for monitoring. In such a case, you are notied with a critical alert conveying that System Conguration Lockdown

mode is enabled, and trap destination information for alerts is not congured.

NOTE

: It is recommended to update the

Dell OM : System conguration lockdown

alert rule interval, immediately after the server

discovery interval is updated or modied. This recommendation ensures that the System Lockdown mode alert is generated after

the completion of server discovery with a certain interval.

You can view the details of the System Conguration Lockdown mode in the Detail View pane of the Diagram View. For more information

about this feature, see Integrated Dell Remote Access Controller 9 Version 3.00.00.00 User's Guide.

This feature is available for servers discovered through both, iDRAC and iSM methods of Server and Rack Workstation Monitoring

(Licensed) feature.

iDRAC Group Manager

iDRAC Group Manager feature is available for 14th generation of the PowerEdge servers to oer simplied basic management of iDRAC,

and associated servers on the same local network. Group Manager feature allows one-to-many console experience without involving a

Server and Rack Workstation Monitoring (Licensed) Feature