Users Guide

• power soft (for Power O Gracefully task)
• power off (for Force Power O task)
• power cycle (for Power Cycle task)
• power reset (for Power Reset task)
• identify on (for LED Identication On task)
• identify off (for LED Identication O task)
Example:
-I lanplus -H $Target/Property[Type="Dell.WindowsServer.Server"]/RemoteAccessIP$ -U root -P
<password> -k <kgkey> power status
8 For LED on or o tasks, enter the command-line parameters in the following format:
• Enter -ip and choose the Remote Access IP with IPMI capability from drop-down menu.
• Enter -u <username> -p <password> -k <kgkey> <IPMI task string>.
9 Click Create to create the task and repeat this procedure for each new BMC task.
Creating a Launch License Manager task
Launch the License Manager task uses the default Dell License Manager (DLM) install path (%PROGRAMFILES(X86)%\Dell\SysMgt
\LicenseManager\Dell.DlmUI.exe
or %PROGRAMFILES%\Dell\SysMgt\LicenseManager\Dell.DlmUI.exe), that cannot be modied.
If the systems deviate from this, install DLM on the management server and create new console tasks in the Authoring pane targeted on
DLM for Dell Server.
To create a task:
1 Launch OpsMgr console, and click Authoring.
2 In the Authoring pane, right-click Tasks under Management Pack Objects, and select Create a New Task.
3 In the Task Type screen, select the Command line under Console Tasks.
4 Select the destination management pack, and click Next.
5 Enter Task name, Description, and set the Task Target with one of the following:
• Dell Windows Server—for Server and Rack Workstation Monitoring feature
• Dell Server—for Server and Rack Workstation Monitoring (Licensed) feature)
• Dell iDRAC7 or iDRAC8 for DRAC Monitoring
6 Click Next.
The Command Line screen is displayed.
7 Enter the path of the application Dell.DlmUI.exe (the path where DLM was installed on the management server) in the Application
eld.
For example, C:\Program Files\Dell\SysMgt\LicenseManager\Dell.DlmUI.exe —default DLM path may dier
based on the operating system language.
8 Click Create to create the task, and repeat this procedure for each new DLM task.
104
Appendix C - Enabling External Program Tasks