Setup Guide

4. Click Next.
The license agreement is displayed.
5. To continue the installation, accept the license terms after reading them, and click Next.
6. Click Change (if necessary) to change the default location of the installation folder and click Next.
7. Click Install.
8. Click Finish on the Install Shield Wizard Completed screen.
By default, the management packs are installed in the location; C:\Program Files\Dell Management
Packs\Server Mgmt Suite\7.0.
The following monitoring features are automatically imported into OpsMgr after the installation of Dell EMC Server
Management Pack Suite:
● Server and Rack Workstation Monitoring feature
● Server and Rack Workstation Monitoring (Licensed) feature, if all the prerequisites are met.
● Dell Feature Management Pack The Feature Management Dashboard is displayed under Monitoring > Dell on the
OpsMgr console. See the individual monitoring sections for importing the monitoring features.
NOTE: The Server and Rack Workstation Monitoring (Licensed) feature requires the installer to run on all the management
servers that are used to monitor the Dell servers. The installer registers the Dell Device Helper Utility—COM+ application
on the management server. The default location of the Dell Device Helper Utility is, C:\Program Files\Dell
Management Packs\Server Mgmt Suite\7.0\Library.
NOTE: The installer also extracts the management packs. To extract the management packs, run the installer on a system
with the Windows client operating system.
A log file containing the installation information is generated after the installation of Dell EMC Server Management Pack Suite.
The log file is available in the folder where Dell_EMC_Server_Management_Pack_Suite.exe is extracted.
Installing Dell EMC Server Management Pack Suite on
multiple management servers
To install Dell EMC Server Management Pack Suite on multiple management servers:
1. Run the Dell_EMC_Server_Management_Pack_Suite.exe on all the required management servers that are part of
the resource pools used for the following monitoring features:
a. Server and Rack Workstation Monitoring (Licensed)
b. Chassis Detailed Monitoring
c. Slot discovery in Chassis Scalable Monitoring
NOTE:
Make sure that you have the Dell Device Helper utility installed, as workflows of Server and Rack Workstation
Monitoring (Licensed) and Chassis Detailed monitoring features requires the Dell Device Helper utility.
2. Import the Management Packs using the Feature Management Dashboard or import the Management Packs using
the OpsMgr Import Management Pack wizard on any of the management servers. OpsMgr automatically distributes the
management packs to all the management servers.
3. To receive traps, add the management server used for discovering the Dell Device to the Dell device’s trap destination list.
NOTE:
Trap destination is automatically configured for the Dell devices discovered and monitored through Server and
Rack Workstation Monitoring (Licensed) feature.
To be able to receive SNMP alerts from devices discovered through the iDRAC access via the Host OS feature, you
must install SNMP services on the Managed Node and set the Management Server IP address as the trap destination
in the SNMP Services. For more information, see monitoring iDRAC access via Host OS in the Dell EMC Server
Management Pack Suite Version 7.0 for Microsoft System Center Operations Manager User's Guide.
Installing Dell EMC Server Management Pack Suite 9