Users Guide

Retrieving log les or capturing conguration les

1 Select Retrieve the task sequence log le from the client after this action runs.

2 Select Enable extended / debug logging by this action to get extensive information in the log les.

3 Select Retain network folder settings from a prior step, if available to copy any available network folder settings from the previous

step or to congure the network folder settings proceed to step 4.

4 Enter a valid network/local path to save the le.

5 Enter the domain and account name to access the path.

6 Enter and conrm the password.

7 If you have specied a network path in step 4, then select Map a drive letter to the network share above and then select a drive

letter from the drop-down menu.

8 Click Apply and then click OK.

Importing Dell Server Driver Packages

Dell EMC Server Deployment Pack provides a wizard to create driver packages in Conguration Manager, based on the server-operating

system combination from the drivers available in the Dell Systems Management Tools and Documentation DVD. These packages are used

in the task sequences that are used for operating system deployment.

1 Insert the Dell Systems Management Tools and Documentation DVD version 6.2 (or later) in your system drive. You can download the

latest ISO image of the DVD from

Dell.com/support .

2 Launch Conguration Manager Console.

3 In the left pane, select Software Library → Overview → Operating Systems → Driver Packages.

4 Right-click Driver Packages, select Dell Server Driver Package → Import Dell PowerEdge Server Driver Packages. The Dell

PowerEdge Server Driver Package Import Wizard

is displayed asking for the location of the Systems Management DVD.

NOTE

• If you have downloaded an ISO image, then create a physical disk or mount it on a virtual drive.

• Use OM Server Driver Pack ISO DVD for version 8.3 and later.

5 Select the drive in which you inserted the DVD and click Next.

A list of driver packages for a combination of servers and operating systems is displayed.

6 Select the required packages and click Finish.

A progress bar displays the status of the import. After the import is complete, the import summary is displayed.

NOTE

: The import of drivers may take more time and the progress bar may not be updated immediately.

7 Click Close.

Using the Dell EMC Server Deployment Pack on systems running System Center

Conguration Manager, 2012 SP2,

2012 R2 SP1, 2012 R2, 2012 SP1, or 2012