Users Guide

Adding a new variable condition
To add a new variable condition under an embedded controller:
1 Expand Embedded Controller and select [No variable conditions dened].
2 Click Variables > New Variable Condition.
The Variable Condition Conguration window is displayed.
3 Under Variable Matching Criteria, you can set a rule to apply this variable only if it matches certain criteria that you select.
4 Click OK to apply the variable condition or Cancel to return to Array Builder.
Editing a variable condition
1 Select the variable condition and click Variables > Edit Variable Condition.
The Variable Condition Conguration window is displayed where you can make changes to your variable condition.
2 Click OK to apply the variable condition or Cancel to return to Array Builder.
Deleting a variable condition
1 Select the variable condition and click Variables > Delete Variable Condition.
A message that all the attached arrays and disks are deleted is displayed.
2 Click Yes to delete or No to cancel.
Arrays
Array nodes include both RAID arrays and non-RAID disk groups (indicated by the dierent icons for RAID arrays and non-RAID disks). By
default, a non-RAID disk group is created when a controller is created. If the controller conguration species the number of disks required,
then the same number of disks are added to the non-RAID group.
• Arrays are added, modied or deleted depending on the controller conguration and number of disks available.
• Array elements contain logical drives and physical disks.
Adding a new array
To add a new array under a variable condition:
1 Select a variable condition and click Arrays > New Array.
The Array Settings window is displayed.
2 Set the required RAID level from the Desired RAID Level drop-down menu.
3 Click OK to apply the array, or Cancel to return to the Array Builder.
Editing an array
1 Select the array and click Arrays > Edit Array.
The Array Settings window is displayed. Here you can select a dierent RAID level for the array.
2 Click OK to apply the changes or Cancel to return to the Array Builder.
Deleting an array
1 Select the array and click Arrays > Delete Array.
A message that all the attached disks will be deleted is displayed.
2 Click Yes to delete or No to cancel.
24
Using the Dell EMC Server Deployment Pack on systems running System Center Conguration Manager, 2012 SP2, 2012
R2 SP1, 2012 R2, 2012 SP1, or 2012