Users Guide
The drivers imported from DTK or CAB are injected into WinPE. This process depends on the Microsoft System Center Conguration
Manager and ADK. It is recommended that you read the limitations documented for these products before creating a boot image. For
example, technet.microsoft.com/en-us/library/hh825070.aspx
NOTE: You can view the DTK conguration details only by using the PowerEdge Deployment ToolKit Conguration
Wizard.
Enabling command prompt for debugging boot images
NOTE: To debug the task sequence workow or failure in the WinPE environment, press
<F8>.
1 Launch Conguration Manager Console.
2 In the left pane, select Software Library > Overview > Operating Systems > Boot Images.
3 Right-click on the boot image and select Properties.
4 In the Properties window, select the Customization tab and select Enable Command Prompt (testing only) check box.
5 Click Apply, and proceed with distribute and update the boot image to the SCCM distribution point. For more information, see
Distributing Content and Updating Distribution Points.
Distributing content and updating distribution points
1 Launch Conguration Manager Console.
2 In the left pane, select Software Library > Overview > Application Management > Packages > Dell PowerEdge Deployment.
3 Right-click PowerEdge Deployment Toolkit Integration and click Distribute Content.
The Distribute Content Wizard is displayed.
4 Right-click PowerEdge Deployment Toolkit Integration and click Update Distribution Points.
A message box prompting for a conrmation is displayed.
5 Click OK to update the distribution points.
6 Click Next and proceed through the wizard to manage the distribution points. For more information, see Online Documentation for
System Center Conguration Manager.
7 Go to Overview > Boot Images > Operating Systems.
8 Right-click the boot image you created and click Distribute Content.
The Distribute Content Wizard screen is displayed.
9 Follow the instructions in the wizard to manage the distribution points.
10 To update and manage distribution points for the driver packages you imported, go to Driver Packages > Dell PowerEdge Driver
Packages <Dell OpenManage Version>.
The driver packages window is displayed.
11 Right-click each of the newly imported driver packages and perform the distribute content and update distribution points operations.
Conguring the task sequence steps to apply operating system
image and driver package
This section describes the steps required to apply operating system image and add Dell drivers.
Using the Dell EMC Server Deployment Pack on systems running System Center
Conguration Manager, 2012 SP2,
2012 R2 SP1, 2012 R2, 2012 SP1, or 2012
11