Install Guide

Specifying a Fully Qualied Domain Name
Specifying an FQDN in System Center Conguration Manager,
2012 SP2, 2012 R2 SP1, 2012 R2, 2012 SP1, or 2012
1 Launch Conguration Manager Console.
2 In the left pane of the Conguration Manager Console, click Administration.
3 Expand Site Conguration and click Servers and Site System Roles.
4 Click the server or site system.
5 On the bottom pane under Site System Roles, right-click Site system and click Properties.
6 Select the Specify an FQDN for this site system for use on the Internet check box.
7 In the Internet FQDN eld, provide the full FQDN.
8 Click Apply and then click OK.
Installing Dell EMC Server Deployment Pack
Before you proceed, make sure that you are logged in with administrator privileges on the server where you want to install Dell EMC Server
Deployment Pack.
Installing Dell EMC Server Deployment Pack for the rst time
on the system
Perform the following steps if you are installing Dell EMC Server Deployment Pack for the rst time on the system:
1 Go to Dell.com/support and then click Drivers & Downloads.
2 Download the DellEMC_Server_Deployment_Pack_v4.0_for_Conguration_Manager_Axx.exe (where xx is the Dell EMC Server
Deployment Pack release number).
3 Run the .exe le and specify a path to extract the contents of the self-extractable zip le.
For example, C:\DSDP
The DellEMC_Server_Deployment_Pack__v4.0_for_Conguration_Manager.exe le is extracted to the
DellEMC_Server_Deployment_Pack_v4.0_for_Conguration_Manager folder in the specied path.
4 Open the command prompt using the Run As Administrator option, navigate to the location of the executable le, and launch the
executable le.
The Welcome screen for Dell EMC Server Deployment Pack is displayed.
5 Click Next.
The license agreement is displayed.
6 Accept the license terms after reading them, and click Next.
If the Conguration Manager console is running, then a message is displayed that the Conguration Manager must be closed for the
installation to continue.
7 Click Next to close the Conguration Manager console automatically.
The Ready to Install the Program screen is displayed.
8 Click Install.
The Installing Dell EMC Server Deployment pack for Conguration Manager progress screen is displayed and after the installation is
complete, the Installation Completed Successfully screen is displayed.
8
Overview