Install Guide
Table Of Contents
- Dell EMC Server Deployment Pack versión 4.0 para Microsoft System Center Configuration Manager Guía de instalación
- Tabla de contenido
- Descripción general
- Requisitos previos y requerimientos
- Sistemas operativos admitidos
- Sistemas admitidos
- Consola, sistema operativo, matriz de compatibilidad DTK, AIK/ADK para Dell EMC Server Deployment Pack
- Configuración de la cuenta de acceso a la red en System Center Configuration Manager, 2012 SP2, 2012 R2 SP1, 2012 R2, 2012 SP1 o 2012
- Especificación de un nombre de dominio completo
- Instalación de Dell EMC Server Deployment Pack
- Actualización de Dell EMC Server Deployment Pack
- Migración a Microsoft System Center Configuration Manager , 2012 SP2, 2012 R2 SP1, 2012 R2, 2012 SP1 o 2012
- Desinstalación de Dell EMC Server Deployment Pack mediante la interfaz gráfica de usuario
- Instalación, actualización y desinstalación de Dell EMC Server Deployment Pack mediante la línea de comandos
- Cómo trabajar con la consola de administración de Configuration Manager
- Solución de problemas
- Otros documentos de Dell que podría necesitar
- Cómo ponerse en contacto con Dell
- Acceso a documentos desde el sitio de asistencia de Dell EMC
2. Escriba el siguiente comando para desinstalar DSDP:
"<Name of the executable file>" /s /x /v /L*v \"a.log\" /qn"
Por ejemplo:
"DellEMC_Server_Deployment_Pack_4.0_for_Configuration_Manager.exe" /s /x /v /L*v
\"a.log\" /qn"
3. Para conservar las imágenes de arranque, ejecute el siguiente comando:
"<Name of the executable file>" /s /x /v" CP_REMOVEBOOTIMAGE="NO" /L*v \"a.log\" /qn"
Por ejemplo:
"DellEMC_Server_Deployment_Pack_4.0_for_Configuration_Manager.exe" /s /x /v"
CP_REMOVEBOOTIMAGE="NO" /L*v \"a.log\" /qn"
NOTA: Elimine todas las secuencias de tareas de DSDP antes de desinstalar DSDP. No puede utilizar las secuencias de tareas
después de desinstalar DSDP.
Actualización de Dell EMC Server Deployment Pack
NOTA: Puede actualizar a Dell EMC Server Deployment Pack 4.0 en sistemas que ejecutan System Center Configuration Manager,
Configuration Manager 2012 SP2, Configuration Manager 2012 R2 SP1, Configuration Manager 2012 R2, Configuration Manager 2012
SP1 o Configuration Manager 2012 instalado con DSDP 3.1.
NOTA: Solamente puede actualizar DSDP 3.1 a DSDP 4.0. Para actualizar desde versiones de DSDP anteriores a 3.1 a DSDP 4.0,
primero debe actualizar a DSDP 3.1.
Actualización mediante la opción Conservar utilidades de Dell Deployment
Toolkit (DTK) y controladores de Windows PE
1. Abra una ventana de Indicador de comandos.
2. Escriba el siguiente comando para actualizar DSDP con la opción Conservar utilidades de Dell Deployment ToolKit (DTK) y
controladores de Windows PE.
"<name of the executable file>" > /s /v"/L*v \"a.log\" /qn"
o
"<name of the executable file>" /s /v" CP_WINPESTATE="RetainWinPE" /L*v \"a.log\" /qn"
NOTA:
Si la actualización se realiza mediante la interfaz de línea de comandos, no se conservan las imágenes de arranque creadas
con las versiones anteriores de DSDP.
Por ejemplo:
"DellEMC_Server_Deployment_Pack_4.0_for_Configuration_Manager.exe" /s /v"
CP_WINPESTATE="RetainWinPE" /L*v \"a.log\" /qn"
Upgrading with the Remove Dell Deployment ToolKit DTK Utilities and Windows
PE Drivers option
1. Open a Command Prompt window.
Descripción general
11