Setup Guide

Install the device in an area that meets the following safety requirements:

• Near a properly grounded AC power outlet.

• In a temperature-controlled room with a continuous temperature range from 0°C to

45°C (32°F to 113°F).

• In a dry, clean, and well-ventilated room away from heat sources such as hot air vents or

direct sunlight

• Away from severe electromagnetic noise

• Away from direct view within the workplace

1 Connect the power adapter to the AC power outlet. These power modules are 1+1

redundant power supplies.

NOTE: Connect the device to a properly wired earth-ground AC power

outlet.

2 Connect one of the default WAN ports (GE3-6 or SFP1-4) to an available Internet

connection. SFP modules are not included.

3 If you received an email from your IT administrator, follow the instructions in the email

to complete the Edge activation.

Edge 3000 Series