Install Guide

User interface

The Edge 3000 Series user interface (UI) includes local web pages—Overview, Properties, and Reset Settings—that provide

troubleshooting functions and information about the interfaces.

Access the Edge 3000 Series UI at https://edge.velocloud.net, or at the IP address 192.168.2.1.

NOTE: Use the UI only for initial configuration and troubleshooting when the Internet is not available. Do not use the

Edge 3000 Series UI during normal operations because the information and configurations are available using the

VMware SD-WAN by VeloCloud Orchestrator. By default, LAN access to this interface is blocked after you activate your

Edge 3000 Series platform.

Topics:

• Overview

• Properties

• Reset settings

Overview

The Overview page provides the status of the routed interfaces (WAN) and switched interfaces (LAN) connections.

The top half of the screen displays a diagram of the device. If connections are active, green indicator lights display on the hardware

diagram. On the

Overview page, next to the device image are two buttons, Overview and Details. To display WAN and LAN connection

status information, click Details.

Underneath the device diagram, the status of the WAN and LAN connections display. In this area, you can change the display by clicking

the Connected, Both, or Unconnected buttons.

If you click a WAN connection, a properties page for that connection opens.

NOTE:

You can also download a diagnostic bundle from the Overview page by clicking the Download Diagnostic Bundle

button. Open the Reset Settings page by clicking the Reset Settings button.

28 User interface