Install Guide

LED Description

10 GbE SFP+ port LEDs—SFP3 and SFP4

• Off—No link

• Solid green—Link operating at maximum speed, 10G

• Solid yellow—Link operating at a lower speed, 1G

• Flashing green—port activity for 10G

• Flashing yellow—port activity for 1G

Table 2. BMC and CPU Console and management Ethernet port LEDs

LED Description

Link LED

• Off—No link

• Solid green—Link operating at a maximum speed,

autonegotiated/forced or 1G

• Solid yellow—Link operating at a lower speed, autonegotiated/

forced or 10/100M

Activity LED

• Off—No link

• Flashing green—Port activity

Prerequisites

For installation instructions, see Site preparations and Edge 3000 Series installation.

The following is a list of components need to install the Edge 3000 Series platform:

• Dell EMC SD-WAN Edge 3400 or 3800 platform

• AC country- and regional-specific cables

• Two-post rail kit mounting brackets for rack installation, included

• Screws for rack installation

• #1 and #2 Phillips screwdrivers, not included

• M2 Philips drive flat head screwdriver, not included

• Ground cable screws for L-bracket—order separately

• M3 ground lug assembly kit screw

• Copper/fiber cables

Other optional components are:

• Expansion card

• UL-certified ground lug assembly kit with bracket

• Extra mounting brackets for the four-post mount

Luggage tag

The Edge 3000 Series has a pull-out tag, known as a luggage tag, on the I/O-side of the platform. The front of the luggage tag includes

platform ID information.

Edge 3000 Series