Install Guide

Properties
If you click a WAN connection from the Overview page (such as GE3 in this example), a Properties page for that connection
displays.
From the Properties page, you can view status information and change the connection properties. For example, you can
specify a static IP address for the interface, or select a PPPoE for the connection. However, Dell EMC recommends entering
static and PPPoE values using Device Settings override on the Orchestrator.
When you finish changing the properties, click the Save Changes button. To return to the previous screen, click the << Return
button.
Reset settings
The Reset Settings page has the following buttons:
● Identify—Flashes the platform lights for 30 seconds to help you locate the Edge.
● Restart Service—Restarts the VMware SD-WAN service.
● Reboot—Initiates a reboot of the platform. When the service light illuminates again, the device has completed the reboot
process.
● Reset Configuration—Returns the platform to an unactivated state. Cloud services are turned off, the platform is no longer
associated with a cloud-managed configuration, and the initial default configuration reapplies.
● Hard Reset—Deactivates the platform, restores default configuration, and restores the original software version.
30
User interface